TCP/IP (Transmission Control Protocol/Internet Protocol) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your computer is provided with a copy of the TCP/IP program just as every other computer that you may send messages to or get information from also has a copy of TCP/IP.

TCP/IP is a two-layer program. The higher layer, Transmission Control Protocol, manages the assembling of a message or file into smaller packets that are transmitted over the Internet and received by a TCP layer that reassembles the packets into the original message. The lower layer, Internet Protocol, handles the address part of each packet so that it gets to the right destination. Each gateway computer on the network checks this address to see where to forward the message. Even though some packets from the same message are routed differently than others, they'll be reassembled at the destination.

TCP/IP uses the client/server model of communication in which a computer user (a client) requests and is provided a service (such as sending a Web page) by another computer (a server) in the network. TCP/IP communication is primarily point-to-point, meaning each communication is from one point (or host computer) in the network to another point or host computer. TCP/IP and the higher-level applications that use it are collectively said to be "stateless" because each client request is considered a new request unrelated to any previous one (unlike ordinary phone conversations that require a dedicated connection for the call duration). Being stateless frees network paths so that everyone can use them continuously. (Note that the TCP layer itself is not stateless as far as any one message is concerned. Its connection remains in place until all packets in a message have been received.)

Many Internet users are familiar with the even higher layer application protocols that use TCP/IP to get to the Internet. These include the World Wide Web's Hypertext Transfer Protocol (HTTP), the File Transfer Protocol (FTP), Telnet (Telnet) which lets you logon to remote computers, and the Simple Mail Transfer Protocol (SMTP). These and other protocols are often packaged together with TCP/IP as a "suite."

Personal computer users with an analog phone modem connection to the Internet usually get to the Internet through the Serial Line Internet Protocol (SLIP) or the Point-to-Point Protocol (PPP). These protocols encapsulate the IP packets so that they can be sent over the dial-up phone connection to an access provider's modem. 

Protocols related to TCP/IP include the User Datagram Protocol (UDP), which is used instead of TCP for special purposes. Other protocols are used by network host computers for exchanging router information. These include the Internet Control Message Protocol (ICMP), the Interior Gateway Protocol (IGP), the Exterior Gateway Protocol (EGP), and the Border Gateway Protocol (BGP).

STACK


(1) TCP/IP is frequently referred to as a "stack." This refers to the layers (TCP, IP, and sometimes others) through which all data passes at both client and server ends of a data exchange. A clear picture of layers similar to those of TCP/IP is provided in our description of OSI, the reference model of the layers involved in any network communication. The term "stack" is sometimes used to include utilities that support the layers of TCP/IP. The Netscape Handbook

Learn More

• CIO Midmarket Resources

says (and we quote): "To make a successful connection to the Internet, your PC needs application software such as Netscape plus a TCP/IP stack consisting of TCP/IP software, sockets software (Winsock.dynamic link library), and hardware driver software (packet drivers). Several popular TCP/IP stacks are available for Windows, including shareware stacks."

(2) In programming, a stack is a data area or buffer used for storing requests that need to be handled. The IBM Dictionary of Computing says that a stack is always a push-down list, meaning that as new requests come in, they push down the old ones. Another way of looking at a push-down list - or stack - is that the program always takes its next item to handle from the top of the stack. (This is unlike other arrangements such as "FIFO" or "first-in first-out.")

Article source: http://searchnetworking.techtarget.com/definition/TCP-IP
Article source: http://searchcio-midmarket.techtarget.com/definition/stack